Coil popping
Page last edited 4,114 days ago
From Hybrid APV Wiki
Jump to navigation
Jump to search
Troubleshooting List – “Reasons why you may be popping Coils”
- Wick touching (inside) cap to
- Wick touching bottom of tank
- Wire coming from negative screw might be touching the top of tank
- Wick too far from positive post
- Coils touching
- Coils too loose or not touching wick
- Wick is not oxodized properly
- Wick is pinched off by wick hole
- Coils are over tight
- Positive and negative screws are to tight
- Not enough wraps, ohms are to low
- Using freshly charged battery and not pulse firing to prep coil
- After oxidizing wick, forgetting to juice burn 4-5 times (soak wick in VG then light on fire and let it burn till it goes out..repeat)
- Make sure there is no old bits of coil under the screws (or stuck to the wick) before replacing w/new coil